Location: /hw/module/1/slot/MotherBoard/node
   PIMM_2XT5_2MB Board: barcode FXL192     part 013-2284-002 rev  D
Location: /hw/module/1/slot/MotherBoard/node/xtalk/8
            IP29 Board: barcode GFL947     part 030-1244-001 rev  H
Location: /hw/module/1/slot/MotherBoard/node/xtalk/8/pci/2
Location: /hw/module/2/slot/MotherBoard/node
   PIMM_2XT5_1MB Board: barcode CXV069     part 013-1896-001 rev  B
Location: /hw/module/2/slot/MotherBoard/node/xtalk/8
            IP29 Board: barcode CXV175     part 030-1025-002 rev  D
Location: /hw/module/2/slot/MotherBoard/node/xtalk/8/pci/2
4 180 MHZ IP27 Processors
CPU: MIPS R10000 Processor Chip Revision: 2.6
FPU: MIPS R10010 Floating Point Chip Revision: 2.6
CPU 0 at Module 1/Slot 1/Slice A: 180 Mhz MIPS R10000 Processor Chip (enabled) 
  Processor revision: 2.6. Scache: Size 2 MB Speed 180 Mhz  Tap 0x9
CPU 1 at Module 1/Slot 1/Slice B: 180 Mhz MIPS R10000 Processor Chip (enabled) 
  Processor revision: 2.6. Scache: Size 2 MB Speed 180 Mhz  Tap 0x9
CPU 2 at Module 2/Slot 2/Slice A: 180 Mhz MIPS R10000 Processor Chip (enabled) 
  Processor revision: 2.6. Scache: Size 1 MB Speed 120 Mhz  Tap 0x9
CPU 3 at Module 2/Slot 2/Slice B: 180 Mhz MIPS R10000 Processor Chip (enabled) 
  Processor revision: 2.6. Scache: Size 1 MB Speed 120 Mhz  Tap 0x9
Main memory size: 4096 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Secondary unified instruction/data cache size: 2 Mbytes
Secondary unified instruction/data cache size: 1 Mbyte
Secondary unified instruction/data cache size: 1 Mbyte
Memory at Module 1/Slot 1: 2048 MB (enabled)
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  Bank 2 contains 512 MB (Standard) DIMMS (enabled)
  Bank 3 contains 512 MB (Standard) DIMMS (enabled)
Memory at Module 2/Slot 2: 2048 MB (enabled)
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  Bank 2 contains 512 MB (Standard) DIMMS (enabled)
  Bank 3 contains 512 MB (Standard) DIMMS (enabled)
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1) (XVM Local Disk) (primary path)
  Disk drive: unit 3 on SCSI controller 0 (unit 3) (XVM Local Disk) (primary path)
  Disk drive: unit 5 on SCSI controller 0 (unit 5) (XVM Local Disk) (primary path)
  Disk drive: unit 6 on SCSI controller 0 (unit 6) (XVM Local Disk) (primary path)
Integral SCSI controller 2: Version QL1040B, single ended
  Disk drive: unit 1 on SCSI controller 2 (unit 1) (XVM Local Disk) (primary path)
  Disk drive: unit 3 on SCSI controller 2 (unit 3) (XVM Local Disk) (primary path)
  Disk drive: unit 5 on SCSI controller 2 (unit 5) (XVM Local Disk) (primary path)
  Disk drive: unit 6 on SCSI controller 2 (unit 6) (XVM Local Disk) (primary path)
Integral SCSI controller 3: Version QL1040B, single ended
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
  CDROM: unit 3 on SCSI controller 1
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3 parallel port: plp1
IOC3 parallel port: plp2
Integral Fast Ethernet: ef0, version 1, module 1, slot MotherBoard, pci 2
Fast Ethernet: ef1, version 1, module 2, slot MotherBoard, pci 2
Origin 200 base I/O, module 1 slot 1
Origin 200 base I/O, module 2 slot 2
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
IOC3/IOC4 external interrupts: 1
IOC3/IOC4 external interrupts: 2
HUB in Module 1/Slot 1: Revision 3 Speed 90.00 Mhz (enabled)
HUB in Module 2/Slot 2: Revision 3 Speed 90.00 Mhz (enabled)
IP27prom in Module 1/Slot n1: Revision 6.156
IP27prom in Module 2/Slot n2: Revision 6.156